Projects

A collection of some of our projects, past and present.

Fabrication of an Assembly Duct Plus Breaching
The 51 duct sections measured up to 36’ x 13’.
Circulating Water Pipe for Power Plants in Florida and Texas

108”, 96”, 84” & 72” Pipe installed at West County, Sandy Creek, and Canaveral.

Solar Energy Project
The seven vessels measured 60’ long and 12’ OD. Finite Element Analysis was performed on all seven vessels.
Combined Cycle Power Plant at Manatee Generating Station
Dixie Southern provided the fabrication of carbon-steel stacks and breaching for HRSG units shipped as 150’ tall stacks to the job site.
HRSG Stacks – Canaveral/Riviera Energy Centers
Dixie Southern provided the fabrication of carbon steel stacks and breaching for HRSG units. The 18’ diameter stacks were shipped in 180º sections for field fit-up and assembly.
180’ Tall x 9’ Diameter ASME Debutanizer – “Butane Splitter”
The debutanizer was shipped to Phoenix Park Natural Gas Refinery in Trinidad via freighter from the nearby Port Manatee. All internal trays were installed at our Florida facility.
ASME Code Demethanizer – “Methane Splitter” for Gas Refinery Vertical
The 316 stainless-steel vessel was fabricated with trays, fully tested in Florida, and shipped to the job site in Kersey, Colorado.
ASME Code Process Vessels
These were used for LaSalle Gas Refinery fuel gas scrubber and stripper reflex drums.
Chemical Plant Jacksonville FL Jacketed ASME Code Vessels
These were used for chemical processes and vertical catch tanks.
Flare Stack Exported to Saudi Arabia Via Port Manatee, FL

170’ x 8’6″ OD 76,000 lbs.

316L Stainless Pipe for Ozone Treatment Plant in Tampa, FL

42″ – 84″ stainless ozone contact pipe and saddles

Bar Screens for Large Pump Station Intake System
75+ tons of 304 stainless-steel bar screens shipped to Everglades job site.
Carbon Steel Process Towers

40’ – 60’ towers were erected at a major canned food manufacturer.

Jet & Rocket Engine Test Equipment Heat Exchangers, Baffles, Duct, and Diffusers
These are used in the exhaust and cooling of testing equipment.
Duplex Stainless Steel Tanks to Brunswick, Georgia
The largest fabrication of 2203 & 2205 duplex stainless in company history. The bleach and pre-bleach tanks measured up to 30’ tall x 12’ OD.
Replacement Turbine Towers

These are a set of four, 160’ tall towers that were part of a major replacement project, as a result of natural disasters in Minnesota in 2011.

316L Stainless Pipe for Ozone Treatment Plant in Orlando, FL

60″ OD ozone contact pipe was installed and welded in the shop.

Bar Screens for Large Pump Station Intake System

75+ tons of 304 stainless-steel bar screens were shipped to Everglades job site.